The 34405A features simultaneous reading of DC and AC measurements with its dual display and can take up to 19 readings/sec at 4½ digit resolution through the standard USB interface. The 34405A comes with a broad range of measurement functions, including temperature and capacitance measurements.
The RS-232 port on the back panel can be used to connect to your PC. A USB to RS-232 interface adapter cable is included standard with the DMM4020 for connecting to your PC’s USB port.
DMM4020 Digital Multimeter - Tektronix
The limit compare mode provides pass/fail indicators to quickly show if a test passes or fails to help eliminate mistakes, especially for results that are close to the limit.
5.5 digit resolution Measure volts, ohms and amps with a basic V dc accuracy of 0.015%. Frequency measurements Save cost and bench space by replacing a multifunction DMM and counter with one instrument.
DC leakage current measurements Make sensitive low current measurements with 1 nA resolution. Dual display Measure two different parameters of the same signal from one test connection. PC Connectivity Easily connect to a personal computer using RS-232 or USB.
A high precision 6 ½ digit Digital Multimeter with dual measurement displays, 11 measurement functions and 10 math functions at high accuracy.
A scanner card, which carries 16 V-Channels and 2 I-Channels, to facilitate the measurements of multiple-test points on either a device or multiple devices all at a press of a button.
The GDM-8261 can be used as a semi-auto ATE System to increase the throughput of manufacturing test or as a data logger to perform long term monitoring or characterization of a DUT.
Dual Measurements to perform two selected measurements simultaneously. High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements. Features Include
6 1/2 Digit Display1,200,000 counts
DCV Basic Accuracy0.0035%
Bright Vacuum Fluorescent Display (VFD)
Standard Interfaces USB, RS232C, Digital I/O
Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. They manufacture more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, etc.
The 2831E takes typical multimeter measurements such as volts, ohms, and amps with great accuracy. It also has built-in math functions and USB connectivity,
The limit operation lets you set and control the values that determine a HI / IN / LO status of subsequent measurements. The meter can be configured to emit an audible alarm when readings are outside of the configured limit.
The meters can also be remotely controlled using application software (downloadable from the B&K website), which supports front panel emulation and data logging of measurement results.
Features Include -
Up to 50,000 count display resolution
0.03% basic VDC accuracy
Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
Dual display to indicate two measurements simultaneously
A high precision 6 ½ digit Digital Multimeter with dual measurement displays, 11 measurement functions and 10 math functions at high accuracy.
A scanner card, which carries 16 V-Channels and 2 I-Channels, to facilitate the measurements of multiple-test points on either a device or multiple devices all at a press of a button.
The GDM-8261 can be used as a semi-auto ATE System to increase the throughput of manufacturing test or as a data logger to perform long term monitoring or characterization of a DUT.
Dual Measurements to perform two selected measurements simultaneously. High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements. Features Include
6 1/2 Digit Display1,200,000 counts
DCV Basic Accuracy0.0035%
Bright Vacuum Fluorescent Display (VFD)
Standard Interfaces USB, RS232C, Digital I/O
Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. They manufacture more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, etc.
