PoScope Mega1 is lowest power consumption USB oscilloscope, function generator and logic analyzer in one on the market. It draws only 60mA thus the best choice for measurement environments which demands power autonomy and longevity.
Integrated high quality analog to digital converters are able to sample up to 2,5MS/s and with maximum data resolution of 10mV at +/-20V input range.
Function generator is capable of generating different pattern test signals with frequency up to 12,5kHz and maximum amplitude of 1,8V. Logic analyzer captures up to 16 digital inputs and gathers data for further analysis. Included free software PoScope4 extends it’s usability for many different applications.
The PoScope4 software is multithreaded Windows application which enables usage of single or multiple PoScopeMega1 devices at same time. It’s core is based around plugin technology thus users can connect to it any measurement device by PoLabs. Parallel processing unit provides fast and smooth data acquisition and graphics drawing.
Easy to use Logic Analyzer / Oscilloscope. The USBee Suite is powerful electronic signal analysis software for your USBee Test Pod. It starts out as an easy to use Logic Analyzer and Oscilloscope and adds serial bus decoding. Virtual Logic Analyzer Oscilloscope - USBee
It lets you solve your electronic problems quickly! Some of the serial busses that are decoded include: I2C, SPI, Async, USB, CAN, 1-Wire, PS/2, SMBus, I2S, Sync Serial and even your own Custom Busses.
Some Highlights in USBee Suite Standard DX
Oscilloscope channels -2
Logic Analyzer channels - 16
In-line protocol decoding
USB, I2C, SPI, CAN and Custom Decoders.
Powerful Tools for Powerful Debugging Logic Analyzer, Oscilloscope, Protocol Analyzer, Signal Generator.
The sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source signal analysis software suite that supports various device types (e.g. logic analyzers, oscilloscopes, and many more).
The CS328A is a USB 2.0 connected mixed signal PC oscilloscope which brings benefits to the user that are unavailable from traditional stand-alone oscilloscopes .
Cleverscope has complex triggering capability. Find a glitch, runt or a slow rise time problem by setting the dual triggers appropriately. Can your present scope trigger on a negative runt occurring in 0.1% of pulses?
Two 10, 12 or 14 bit analog channels sampling simultaneously at 100 MSa/sec. AC or DC coupled.
USB 2.0 Interface to the PC or 10/100Mbit ethernet, depending on option
Gain automatically set from 20 mV FSD to +/-200V FSD by choosing graph view and probe switch setting.
Offset automatically set to correspond to the selected amplitude axis view. As an example a graph with amplitude axis of 2.40 to 2.42V automatically chooses a 20mV range offset by +2.40V - good for looking at small signals in single supply op-amp applications.
Analog triggering of the waveform in view with a resolution of 1% of the display height. The analog trigger may optionally be conditioned with a low pass, high pass or noise filter.
Four independent delay channels or Two fully-defined pulse channels s. Front-panel BNC outputs deliver TTL, ECL, NIM or variable level (-3 to +4 V) pulses into 50 Ω or high impedance loads. Triggering - The DG535 can be triggered internally from 1 mHz to 1 MHz with four-digit frequency resolution. External, single-shot and burst mode triggers are also supported.