The RS-232 port on the back panel can be used to connect to your PC. A USB to RS-232 interface adapter cable is included standard with the DMM4020 for connecting to your PC’s USB port.
DMM4020 Digital Multimeter - Tektronix
The limit compare mode provides pass/fail indicators to quickly show if a test passes or fails to help eliminate mistakes, especially for results that are close to the limit.
5.5 digit resolution Measure volts, ohms and amps with a basic V dc accuracy of 0.015%. Frequency measurements Save cost and bench space by replacing a multifunction DMM and counter with one instrument.
DC leakage current measurements Make sensitive low current measurements with 1 nA resolution. Dual display Measure two different parameters of the same signal from one test connection. PC Connectivity Easily connect to a personal computer using RS-232 or USB.
It has 4 times as much capture buffer, a software switchable x10 and x50 analog input multiplier and AC/DC coupling, switchable 50 ohm termination, a double speed built-in USB host interface all in a physical package about 2/3 the size and weight of BS300U.
100 MHz Analog Bandwidth Scope.
40MS/s Logic Analyzer, 25nS capture.
Dual Analog Channels (4 inputs via BNC & POD).
8 logic/timing channels and Smart POD.
Arbitrary Waveform Generator.
Real-Time Spectrum Analyzer.
Mixed Signal Data Recorder.
Networkable (BS310N).
User Programmable.
BitScopes are USB or Ethernet connected PC Based Mixed Signal Oscilloscopes. This means they capture and display one, two or four analog signals and eight logic or timing signals, simultaneously.
Hot-line state detection - Protects Meter on accidental voltage in Part/equipment on Test. (>30V). Large bolt mark - A large (lightning) bolt mark is with a buzzer sound, when HV is applied.
A Mixed Signal Oscilloscope (MSO) is a combination Logic Analyzer and Oscilloscope. Since all inputs sample simultaneously, it is easy to see the timing relationships of the digital and analog components of your circuit.
The MIT200 series of insulation and continuity testers are ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems. - https://megger.com/
Megger - MIT200 Insulation Tester
Insulation testing to 1000 MΩ
Continuity testing at 200 mA down to 0.01 Ω
Live circuit warning (voltage display) and test inhibit
Digital/Analogue display
Alkaline or rechargeable batteries
-10ºC to +55ºC operating temperature
The display offers a combination of digital readout and analog display, using Megger’s patented DART display technology, which includes the benefits of an LCD displa such as robust, clear and accurate measurement, with an analog pointer response for evaluating circuit charge and discharge characteristics.. Continuity testing
Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. There is no need to press the test button. All instruments will measure up to 100 Ω on continuity, of which 0-10 Ω is performed at greater than 200 mA to meet international electrical testing requirements.
Megger - Electric Power Test Equipment
"For over 100 years, Megger has been the premier provider of electric test equipment and measuring instruments for electrical power applications."