Store up to 500M samples at speeds as fast as 24MB/s. Serial Protocol Analyzer, SPI Protocol Analyzer, I2C Protocol Analyzer and1-Wire Protocol Analyzer.
Saleae Logic - PC based Logic Analyzer - https://www.saleae.com/
"With an anodized aluminum enclosure and clean, intuitive software, Logic sets the standard for entry-level logic analyzers."
Logic’s inputs are protected against overvoltage conditions via current-limiting resistors and ultra-low-capacitance diode clamps. A resettable fuse protects the USB ground return line to augment the USB host’s existing protection.
Voltage Range: -0.5 to 5.25V
Input Low Voltage: -0.5 to 0.8V
Input High Voltage: 2 to 5.25V
ESD and over-voltage protection
Logic threshold not adjustable
Sample Rate & Depth
24MHz Maximum Sample Rate
200M+ samples, absolute limit depends on system ram
The RS-232 port on the back panel can be used to connect to your PC. A USB to RS-232 interface adapter cable is included standard with the DMM4020 for connecting to your PC’s USB port.
DMM4020 Digital Multimeter - Tektronix
The limit compare mode provides pass/fail indicators to quickly show if a test passes or fails to help eliminate mistakes, especially for results that are close to the limit.
5.5 digit resolution Measure volts, ohms and amps with a basic V dc accuracy of 0.015%. Frequency measurements Save cost and bench space by replacing a multifunction DMM and counter with one instrument.
DC leakage current measurements Make sensitive low current measurements with 1 nA resolution. Dual display Measure two different parameters of the same signal from one test connection. PC Connectivity Easily connect to a personal computer using RS-232 or USB.
It has 4 times as much capture buffer, a software switchable x10 and x50 analog input multiplier and AC/DC coupling, switchable 50 ohm termination, a double speed built-in USB host interface all in a physical package about 2/3 the size and weight of BS300U.
100 MHz Analog Bandwidth Scope.
40MS/s Logic Analyzer, 25nS capture.
Dual Analog Channels (4 inputs via BNC & POD).
8 logic/timing channels and Smart POD.
Arbitrary Waveform Generator.
Real-Time Spectrum Analyzer.
Mixed Signal Data Recorder.
BitScopes are USB or Ethernet connected PC Based Mixed Signal Oscilloscopes. This means they capture and display one, two or four analog signals and eight logic or timing signals, simultaneously.